The PowerMOVE is a hoist for moving patients safely and comfortably. The mast allows a translational movement of the lifting arm. Regardless of the height, the patient is always lifted at the same distance from the mast, and can therefore be positioned very precisely. The PowerMOVE requires little maintenance and the legs are adjusted electrically, as are the height and tilt of the arm and spreader bar. The touch&move powered driving device makes working with the hoist effortless, easier and less stressful. This is an intelligent solution for tackling physical stresses and strains, reducing the risk of physical complaints.
The hoist is designed for moving patients in combination with a full lifting sling. The PowerMOVE has a four-point electric spreader bar with flexible spacers as standard. Typically supplied for use in with clip slings, the PowerMOVE can also be fitted with a two-point spreader bar for loop slings. The hoist comes with a stiffener case and the option of an integrated weighing unit.
touch&move powered driving device
New: proper usage indication
Translational column lift with a fixed spreader bar
Large unloading range thanks to the long lifting arm and legs
Low-maintenance column with spindle
Safe working load: 200 kg
Highest position lifting arm
Lowest position lifting arm
Height of the legs
Space under the legs
Reach lifting arm at highest position
Reach lifting arm at lowest position
Push handle height
Minimum total height
Maximum total height
Internal width at maximum spread
Internal width at minimum spread
Maximum turning radius
Duration of complete lifting movement
touch&move driving support
The PowerMOVE hoist has touch&move driving support as standard. This is a unique, intuitive electrically powered drive that makes working with a hoist easier and more pleasant. The push handle of a hoist with touch&move driving support has sensors that measure the magnitude and direction of the force exerted on it. A gentle push against the push handle is enough to set the additional wheel under the hoist in motion, either forwards, backwards or sideways. That may sound technical but using it is very intuitive.
New: the proper usage indication on the control panel enables you to check whether the hoist is being used correctly. And off you go…!
Spreader bar options
The PowerMOVE has a four-point electric tilting spreader bar as standard. This four-point bar is suitable for slings with clips that can be fixed to the attachment points. Using the hand control or the control panel, the patient’s position can be changed during the transfer. When slings with loops are to be used, the PowerMOVE can be fitted with a two-point spreader bar. This type of spreader bar has two attachment points and no tilt function. The patient’s position can therefore only be changed by varying the length of the loops.
Regularly weighing passive patients is very difficult in practice. A hoist with weighing unit can help make periodic weighing of a patient simpler. The weighing unit is optional and can be integrated into the lifting arm of the PowerMOVE. This makes it possible to weigh patients easily on a regular basis. The maximum weighing capacity is 200 kg.
Please contact us to discuss your needs in relation to this product. We want to ensure you are getting exactly what you require.